Airbag / SRSCritical⚠️ Professional Recommended

B0002

Driver Frontal Stage 1 Squib Circuit Resistance High

Driver airbag firing circuit has higher resistance than expected.

SeverityCritical
CategoryAirbag / SRS
Est. Repair Cost$200–$900
Code TypeBody
DIY RepairProfessional
DifficultyProfessional

⚡ Common Causes

  • ›Corroded connector
  • ›Damaged wiring
  • ›Faulty clockspring
  • ›Failed airbag module

⚠️ Symptoms

  • ›SRS warning light
  • ›Airbag system disabled

✅ How to Fix — Step by Step

  • Step 1:Inspect airbag wiring connectors
  • Step 2:Replace clockspring
  • Step 3:Have specialist inspect airbag system

🔧 Diagnostic Tools Required

Using the correct diagnostic tools helps identify the root cause of B0002 before replacing parts unnecessarily. Always confirm the fault using live data and manufacturer-recommended diagnostic procedures.

🚗 Vehicles Commonly Reporting B0002

Vehicles equipped with driver frontal airbags using a Stage 1 squib circuitExact SRS circuit design varies by manufacturer and model year

❌ Common Mistakes to Avoid

📋 Technical Service Bulletins

Check manufacturer service information for SRS inspection procedures, connector repairs, clockspring diagnosis, and applicable safety precautions.

🏭 Manufacturer-Specific Notes

All B0002

B0002 is a restraint-system code whose exact circuit configuration can vary by manufacturer. Use the vehicle-specific SRS wiring diagram and diagnostic procedure.

🎓 Expert Tip: Because this is an airbag firing circuit, diagnose it strictly according to the OEM SRS procedure rather than using generic electrical testing methods.
💡 Pro Tip: Airbag repairs require professional handling — improper repair can cause accidental deployment.

Repair Cost Estimate

Full Repair Estimate
$200–$900
DIY Possible?
PRO
Severity
Critical
Diagnosis Time
30–90 minutes
Repair Time
1–3 hours depending on the fault

Frequently Asked Questions

What does OBD2 code B0002 mean?+
B0002 stands for Driver Frontal Stage 1 Squib Circuit Resistance High. Driver airbag firing circuit has higher resistance than expected.
What causes code B0002?+
Corroded connector; Damaged wiring; Faulty clockspring; Failed airbag module
How do I fix code B0002?+
Inspect airbag wiring connectors; Replace clockspring; Have specialist inspect airbag system
How much does it cost to fix B0002?+
Estimated repair cost for B0002 is $200–$900.
Is B0002 DIY-friendly?+
B0002 typically requires professional equipment and a qualified mechanic.

References

Related Codes

B0001Driver Frontal Stage 1 Squib Circuit Resistance Low
Critical
B0010Passenger Frontal Stage 1 Squib Circuit Resistance Low
Critical
B0051Side Impact Sensor Left Front — Circuit Low
Critical
B0020Driver Side Deployment Control (Circuit/Performance)
Critical
B0030Passenger Side Deployment Control (Circuit/Performance)
Critical
B0040Driver Side Pole Deployment Control (Circuit/Performance)
Critical