EngineModerate✅ DIY Friendly

P0104

Mass Air Flow Circuit Intermittent

MAF sensor signal drops in and out intermittently.

SeverityModerate
CategoryEngine
Est. Repair Cost$50–$300
Code TypePowertrain
DIY RepairYes
DifficultyIntermediate

⚡ Common Causes

  • ›Loose MAF sensor connector
  • ›Damaged wiring harness
  • ›Failing MAF sensor
  • ›Vibration-related connection issue

⚠️ Symptoms

  • ›Intermittent stalling
  • ›Random hesitation
  • ›Occasional rough idle
  • ›Check engine light comes and goes

✅ How to Fix — Step by Step

  • Step 1:Clean and reseat MAF connector
  • Step 2:Inspect wiring for chafing
  • Step 3:Wiggle test wiring while monitoring live data
  • Step 4:Replace MAF sensor

🔧 Diagnostic Tools Required

Using the correct diagnostic tools helps identify the root cause of P0104 before replacing parts unnecessarily. Always confirm the fault using live data and manufacturer-recommended diagnostic procedures.

🚗 Vehicles Commonly Reporting P0104

Vehicles equipped with electronically monitored MAF sensorsIntermittent failure patterns depend on sensor design, wiring layout, and vehicle vibration

❌ Common Mistakes to Avoid

📋 Technical Service Bulletins

Check OEM service information for known MAF connector, terminal, wiring, vibration, and harness-routing issues.

🏭 Manufacturer-Specific Notes

All P0104

P0104 identifies an intermittent MAF signal. The exact diagnostic threshold and test procedure vary by manufacturer and engine.

🎓 Expert Tip: A scope or high-quality scan tool can be useful when the fault is intermittent. Compare MAF signal behavior with engine load and RPM while reproducing the complaint.
💡 Pro Tip: Wiggle the wiring harness while watching live MAF data — intermittent faults often reveal themselves this way.

Repair Cost Estimate

Full Repair Estimate
$50–$300
DIY Possible?
YES
Severity
Moderate
Diagnosis Time
45–90 minutes
Repair Time
30–120 minutes depending on wiring damage

Frequently Asked Questions

What does OBD2 code P0104 mean?+
P0104 stands for Mass Air Flow Circuit Intermittent. MAF sensor signal drops in and out intermittently.
What causes code P0104?+
Loose MAF sensor connector; Damaged wiring harness; Failing MAF sensor; Vibration-related connection issue
How do I fix code P0104?+
Clean and reseat MAF connector; Inspect wiring for chafing; Wiggle test wiring while monitoring live data; Replace MAF sensor
How much does it cost to fix P0104?+
Estimated repair cost for P0104 is $50–$300.
Is P0104 DIY-friendly?+
Yes — P0104 is generally DIY-friendly with basic tools.

References

Related Codes

P0101Mass Air Flow Sensor Range/Performance
ModerateDIY
P0102Mass Air Flow Circuit Low Input
ModerateDIY
P0103Mass Air Flow Circuit High Input
ModerateDIY
P0505Idle Air Control System Malfunction
ModerateDIY
P0128Coolant Temperature Below Thermostat Regulating Temperature
ModerateDIY
P0300Random/Multiple Cylinder Misfire Detected
CriticalDIY