EmissionsMinor✅ DIY Friendly

P0136

O2 Sensor Circuit Malfunction Bank 1 Sensor 2

Downstream O2 sensor (after catalytic converter) on Bank 1 has a circuit fault.

SeverityMinor
CategoryEmissions
Est. Repair Cost$100–$350
Code TypePowertrain
DIY RepairYes
DifficultyBeginner

⚡ Common Causes

  • ›Faulty downstream O2 sensor
  • ›Damaged wiring
  • ›Failed catalytic converter
  • ›Exhaust leak after cat

⚠️ Symptoms

  • ›Check engine light
  • ›Possible failed emissions test
  • ›No noticeable driveability issue usually

✅ How to Fix — Step by Step

  • Step 1:Check sensor wiring and connector
  • Step 2:Test sensor voltage
  • Step 3:Replace downstream O2 sensor
  • Step 4:Check catalytic converter efficiency

🔧 Diagnostic Tools Required

Using the correct diagnostic tools helps identify the root cause of P0136 before replacing parts unnecessarily. Always confirm the fault using live data and manufacturer-recommended diagnostic procedures.

🚗 Vehicles Commonly Reporting P0136

Toyota CamryHonda AccordFord FusionChevrolet MalibuNissan AltimaHyundai Sonata

❌ Common Mistakes to Avoid

📋 Technical Service Bulletins

Some manufacturers have published bulletins on downstream sensor circuit faults, including wiring harness repairs. Check your manufacturer's TSB database using your VIN before replacing parts.

🏭 Manufacturer-Specific Notes

Toyota P0136

The downstream sensor harness runs close to the exhaust. Inspect it for heat damage along its full length before buying a sensor.

Ford P0136

Check the sensor connector for oil or moisture. A wet connector can cause intermittent circuit faults.

Honda P0136

Corroded or loose connectors under the vehicle are a common cause. Clean and reseat the connector before replacing the sensor.

🎓 Expert Tip: Check the sensor wiring and connector first. A damaged wire near the exhaust sets this code even when the sensor itself is good.
💡 Pro Tip: Downstream O2 sensors mainly monitor catalytic converter health — driveability is rarely affected.

Repair Cost Estimate

Full Repair Estimate
$100–$350
DIY Possible?
YES
Severity
Minor
Diagnosis Time
20–40 minutes
Repair Time
30–60 minutes

Frequently Asked Questions

What does OBD2 code P0136 mean?+
P0136 stands for O2 Sensor Circuit Malfunction Bank 1 Sensor 2. Downstream O2 sensor (after catalytic converter) on Bank 1 has a circuit fault.
What causes code P0136?+
Faulty downstream O2 sensor; Damaged wiring; Failed catalytic converter; Exhaust leak after cat
How do I fix code P0136?+
Check sensor wiring and connector; Test sensor voltage; Replace downstream O2 sensor; Check catalytic converter efficiency
How much does it cost to fix P0136?+
Estimated repair cost for P0136 is $100–$350.
Is P0136 DIY-friendly?+
Yes — P0136 is generally DIY-friendly with basic tools.

References

Related Codes

P0135O2 Sensor Heater Circuit Malfunction Bank 1 Sensor 1
MinorDIY
P0130O2 Sensor Circuit Malfunction Bank 1 Sensor 1
ModerateDIY
P0131O2 Sensor Circuit Low Voltage Bank 1 Sensor 1
ModerateDIY
P0133O2 Sensor Circuit Slow Response Bank 1 Sensor 1
ModerateDIY
P0442Evaporative Emission Control System Small Leak Detected
MinorDIY
P0455Evaporative Emission Control System Large Leak Detected
MinorDIY