AutoCodeFix
🔍
Accident Estimate
ElectricalCritical⚠️ Professional Recommended

P0602

Control Module Programming Error

The ECM has detected an error in its programmed calibration data.

SeverityCritical
CategoryElectrical
Est. Repair Cost$300-$1200
Code TypePowertrain
DIY RepairProfessional

⚡ Common Causes

  • Incomplete or corrupted software flash
  • Aftermarket tuning conflict
  • ECM hardware fault

⚠️ Symptoms

  • Check engine light
  • Possible erratic engine performance
  • May not start

✅ How to Fix — Step by Step

  • Step 1:Reflash ECM with correct calibration
  • Step 2:Remove any aftermarket tunes and reflash to stock
  • Step 3:Replace ECM if error persists

🔧 Diagnostic Tools Required

Using the correct diagnostic tools helps identify the root cause of P0602 before replacing parts unnecessarily. Always confirm the fault using live data and manufacturer-recommended diagnostic procedures.

💡 Pro Tip: If an aftermarket performance tune was installed, reverting to stock calibration often clears this code.

Repair Cost Estimate

Full Repair Estimate
$300-$1200
DIY Possible?
PRO
Severity
Critical

Frequently Asked Questions

What does OBD2 code P0602 mean?+
P0602 stands for Control Module Programming Error. The ECM has detected an error in its programmed calibration data.
What causes code P0602?+
Incomplete or corrupted software flash; Aftermarket tuning conflict; ECM hardware fault
How do I fix code P0602?+
Reflash ECM with correct calibration; Remove any aftermarket tunes and reflash to stock; Replace ECM if error persists
How much does it cost to fix P0602?+
Estimated repair cost for P0602 is $300-$1200.
Is P0602 DIY-friendly?+
P0602 typically requires professional equipment and a qualified mechanic.

AI Diagnosis

🤖 AI-powered diagnosis for P0602 is coming soon.

Related Codes

P0606PCM Processor Fault
Critical
P0601Internal Control Module Memory Check Sum Error
Critical
P0603Internal Control Module Keep Alive Memory Error
Critical
P0604Internal Control Module Random Access Memory Error
Critical
P0605Internal Control Module Read Only Memory Error
Critical
P0607Control Module Performance
Critical