AutoCodeFix
🔍
Accident Estimate
CRITICAL — Stop ImmediatelyOBD CODE: ADAS-AEB

Auto Emergency Brake Warning Light

The Automatic Emergency Braking (AEB) system is unavailable, malfunctioning, or has detected conditions that may prevent automatic braking assistance.

🔍 Common Causes
AEB system fault
Radar obstruction
Front camera obstruction
Sensor misalignment
Camera calibration problem
ADAS communication fault
Sensor failure
✅ What To Do

Drive carefully, increase following distance, and do not rely on AEB until the system is restored. Have the fault diagnosed promptly.

💡 Use an OBD2 scanner to read the exact fault code and confirm the root cause before replacing parts.
📖 What Does This Warning Light Mean?

Automatic Emergency Braking can apply the brakes when the system detects an imminent collision and the driver does not respond sufficiently. Availability depends on vehicle speed, road conditions, sensor visibility, and manufacturer design.

⚠️ Common Symptoms
✓AEB unavailable message
✓Forward safety system warning
✓Collision-avoidance disabled
✓Unexpected AEB warning
✓Radar or camera unavailable message
🚦 Safe To Drive?

⚠️ Drive With Caution

The vehicle may remain drivable, but automatic emergency braking may not operate correctly. Maintain a greater following distance and drive manually.

🔧 How to Diagnose the Problem
1
Scan the ADAS module
2
Inspect radar and camera sensing areas
3
Check CAN/network communication
4
Check sensor alignment and calibration
5
Inspect bumper and windshield damage
6
Verify related brake-system faults
🛠️ How to Fix the Problem
✓
Clean sensors
✓
Repair wiring or connectors
✓
Repair sensor mounting
✓
Calibrate ADAS sensors
✓
Replace a confirmed faulty sensor or module
✓
Clear faults and verify AEB operation
💰 Estimated Repair Cost

$100-$2,500+ depending on sensor, module, wiring, or calibration

Repair costs vary depending on the exact diagnostic trouble code, vehicle make and model, labor rates, and which component has failed. Always diagnose the problem before replacing any parts.

🛡️ How to Prevent This Problem
✓
Keep radar and camera areas clean
✓
Follow calibration procedures after collision repairs
✓
Keep windshield and bumper sensing areas unobstructed
✓
Repair ADAS faults promptly
📌 Final Advice

An AEB fault can disable an important collision-avoidance feature. Do not assume the system will intervene; restore and verify it before relying on automatic braking assistance.

❓ Frequently Asked Questions

What does an AEB unavailable message mean?

The car will no longer brake for you automatically. It is usually a blocked or misaligned forward sensor rather than a brake fault, but the outcome is the same: the feature is switched off.

Can I drive without AEB?

Yes. Your ordinary brakes are unaffected. Just increase your following distance, since the system that would have caught a late-braking moment is not watching.

How is an AEB fault diagnosed?

The ADAS module is scanned, then the radar and camera sensing areas are inspected for obstruction or impact damage. Network communication is verified, sensor alignment and calibration status are checked, and any related brake-system codes are reviewed, since AEB will also disable itself when the brake or stability side reports a fault.

How much does AEB repair cost?

Cleaning a sensor costs nothing. Calibration is typically $250-$600, and a replacement forward radar or camera with calibration can reach $2,500.

🚨 Related Warning Lights
Pre-Collision
View warning guide →
Forward Radar
View warning guide →
Brake Warning
View warning guide →
Full Diagnostic Guide

See every fault code, sensor test, and repair step for ADAS-AEB

📋 Full Guide for ADAS-AEB →