A module (commonly the ECM or BCM) has lost CAN bus communication with the instrument panel cluster, so gauge and warning light data can no longer be exchanged.
SeverityModerate
CategoryNetwork / CAN
Est. Repair Cost$200–$800
Code TypeNetwork
DIY RepairProfessional
DifficultyProfessional
⚡ Common Causes
›Failed instrument cluster
›CAN bus wiring fault
›Power loss to cluster
⚠️ Symptoms
›Blank instrument cluster
›No gauges
›Warning lights not working
✅ How to Fix — Step by Step
Step 1:Check cluster fuse and power
Step 2:Inspect CAN wiring to cluster
Step 3:Replace instrument cluster
🔧 Diagnostic Tools Required
✔OBD-II Diagnostic Scanner
✔CAN Bus Tester
✔Digital Multimeter
✔Oscilloscope
Using the correct diagnostic tools helps identify the root cause of U0155 before replacing parts unnecessarily. Always confirm the fault using live data and manufacturer-recommended diagnostic procedures.
🚗 Vehicles Commonly Reporting U0155
Modern vehicles equipped with electronically networked instrument clustersExact communication architecture and diagnostic procedure varies by manufacturer
❌ Common Mistakes to Avoid
✘Replacing the instrument cluster without checking its power and ground
✘Clearing U-codes before recording all related communication faults
✘Ignoring low-voltage conditions
✘Testing the cluster without checking the shared communication network
📋 Technical Service Bulletins
Check manufacturer technical service information for known CAN-bus issues, cluster software updates, wiring repairs, and module configuration procedures.
🏭 Manufacturer-Specific Notes
All manufacturers U0155
U0155 identifies a communication loss but does not by itself prove that the instrument cluster has failed. The cause may be elsewhere on the vehicle network.
🎓 Expert Tip: If U0155 appears with several other U-codes, diagnose network power, grounds, and communication circuits before replacing the instrument cluster.
💡 Pro Tip: Check the instrument cluster's power and ground circuits before assuming a wiring fault on the CAN bus itself — a cluster with no power will also show as a lost-communication code.
Repair Cost Estimate
Full Repair Estimate
$200–$800
DIY Possible?
PRO
Severity
Moderate
Diagnosis Time
1–3 hours
Repair Time
1–6+ hours depending on the network or module fault
Frequently Asked Questions
What does OBD2 code U0155 mean?+
U0155 stands for Lost Communication With Instrument Panel Cluster. A module (commonly the ECM or BCM) has lost CAN bus communication with the instrument panel cluster, so gauge and warning light data can no longer be exchanged.
What causes code U0155?+
Failed instrument cluster; CAN bus wiring fault; Power loss to cluster
How do I fix code U0155?+
Check cluster fuse and power; Inspect CAN wiring to cluster; Replace instrument cluster
How much does it cost to fix U0155?+
Estimated repair cost for U0155 is $200–$800.
Is U0155 DIY-friendly?+
U0155 typically requires professional equipment and a qualified mechanic.